Custom PTC solutions from prototype to mass production.

Pentair 42001-0053S Pool NTC Temperature Sensor

‌
‌
‌
‌
‌

Product Details

Description
Privacy Policy
Reviews

Product Description

The 42001-0053S Thermistor is used to detect the temperature of the pool water entering the heater.
This replacement thermistor is compatible with Pentair Sta-Rite Max-E-Therm and Pentair MasterTemp pool and spa heaters electrical system.
This pool & spa heater thermistor can help fix problems such as incorrect temperature displaying on your control panel, pool heater not running, and HLS error code.
Affordable and easy to install.
Replaces thermistor that has been damaged, corroded, rusted or failed.


Specification

Type: Pool Heater Part
Name: Pool Temperature Sensor
Compatible with: Pool and spa heaters electrical system
Manufacturer Part Number: 42001-0053S
Package Includes: 1 Pool Temperature Sensor

Product name NTC Temperature Sensor
Clear Thread Distinct thread lines with no sharp edges and tape to ensure a tight seal
Protective Sealing Sprayed with epoxy so water cannot penetrate inside the sensor to ensure high quality and reliability
Stainless Steel Durable Housing The sensor is inside an anti-oxidation and corrosion resistant stainless steel housing

Pentair 42001-0053S Pool NTC Temperature Sensor

Pentair 42001-0053S Pool NTC Temperature Sensor

Pentair 42001-0053S Pool NTC Temperature Sensor

Pentair 42001-0053S Pool NTC Temperature SensorPentair 42001-0053S Pool NTC Temperature Sensor

Pentair 42001-0053S Pool NTC Temperature Sensor

Pentair 42001-0053S Pool NTC Temperature Sensor

Features

UNIVERSAL COMPATIBILITY: 42001-0053S Heater Thermistor & 42001-0063S High Limit Switch & 42002-0024S Stack Flue Sensor Replacement compatible with Pentair Sta-Rite, MasterTemp, Max-E-Therm pool and spa heaters electrical systems

PREMIUM QUALITY: Our products are made of stainless steel, rust free material, easy to install and durable to use. The Stack Flue Sensor prevents the flue gas output from exceeding 500 degrees F, 42001-0053S can operate temperature from -20°C to 80°C. Also 42001-0063S sensor detects when water temperature exceeds safe level and automatically opens heat exchanger outlet

EASY INSTALLATION & SAVE MONEY: Find a video from Youtube, just take a few minute to replace following the video. Make sure the power is shut off before replacement, and wear work gloves to protect your hands.Save yourself from the high prices of the pool store or an expensive repair call

AFTER-SALE SERVICE: Tianrui commit to provide customer with quality product and excellent service as well as reasonable price, you can feel confident to select our product without any doubt. If you have any question during shopping, welcome to contact us. We are obliged to provide a refund or replacement if the purchaser is not satisfied with our product

Application

If the temperature on your control panel’s display is showing an incorrect temperature, your thermistor may need to be replaced.
Thermistors often display a temperature that is much too high when they reach the end of their lifespan.
Fix this issue easily by replacing your worn-out thermistor temperature sensor with this 42001-0053S Thermistor replacement.
Make sure the power is shut off before replacement. Wear work gloves to protect your hands.

Pool Heater Isn’t Heating---Sometimes, your pool heater ignites but doesn’t reach the desired temperature. Or, maybe your heater isn’t generating heat at all. Both situations are very common.--Inspect your temperature sensor

Pentair 42001-0053S Pool NTC Temperature Sensor

People who viewed this also viewed

NTC Temperature Sensor for Dryers and Washing Machines

Washer-dryer temperature sensors are crucial components that monitor thermal conditions during both washing and drying cycles. These specialized sensors ensure optimal performance by providing real-time temperature data to the appliance's control system, enabling precise heat management for various fabric types and program settings.

NTC Temperature Sensor for Dryers and Washing Machines

Washer-dryer temperature sensors are crucial components that monitor thermal conditions during both washing and drying cycles. These specialized sensors ensure optimal performance by providing real-time temperature data to the appliance's control system, enabling precise heat management for various fabric types and program settings.

Cylinder Stainless Steel Probe NTC Temperature Sensor

The stainless steel NTC temperature sensor is an NTC (Negative Temperature Coefficient) thermistor temperature probe enclosed in a stainless steel housing. It combines the high sensitivity of the NTC thermistor with the excellent mechanical strength and corrosion resistance of stainless steel, making it a durable temperature sensing device widely used in complex industrial environments. Its core operating principle is to accurately detect temperature by measuring the change in resistance, which decreases exponentially with increasing temperature.

G12 G18 Wall Boiler Pipe Clamp NTC Temperature Sensor

Pipe clamp temperature sensors are specialized thermal monitoring devices designed for non-invasive surface temperature measurement on pipes and tubing. These sensors feature a unique clamping mechanism that allows for secure attachment to various pipe diameters, making them ideal for HVAC, industrial processing, and plumbing applications where direct fluid contact is not possible or desired.

What to include in your inquiry

Clear requirements help our engineering team answer faster and recommend the right component the first time.

  • Product type and application, such as an NTC sensor for a battery pack or a PTC heater for an air-handling unit.
  • Key electrical values: resistance at 25 °C, B-value or switching temperature, rated voltage and power.
  • Operating temperature range, response time and any insulation, sealing or waterproof requirements.
  • Mechanical details including probe or housing size, lead length, cable, terminal and connector type.
  • Expected annual quantity, sample needs and target delivery schedule.
  • Drawings, photos or a current part number if you are replacing an existing component.

What happens after you contact us

  1. An engineer reviews your requirements and asks about any missing parameters.
  2. We recommend a standard model or propose a custom design together with a quotation.
  3. Samples are prepared for your testing and approval before volume production starts.